Like I promised last week, here is the DIY to make a simple and pretty box for the memory cards. It’s really simple and you can manage to make this box in under 30 minutes.
The first step is to disassemble the old box, that came with the blank memory cards. Do this by loosening the old glued parts really carefully. You need the whole cardboard as a pattern. So it should be as it was, before it was glued together for the first time.
Then you take the disassembled box pattern, apply it to your new cardboard, draw around it and then cut it out. Be really exact with corners and angles. Otherwise you will have problems to piece them together later. Be sure to cut not too deep into the corners, because that way it will be more difficult to get the fold lines straight.
Now you should use your ruler and your cutter to help you fold the side parts up like your pattern. You can do this by applying the ruler parallel to the fold line and draw with the edgeless side of the cutter along. This way you don’t really cut the paper in two, but impress the fold line, so it will be a lot easier to fold. Use your pattern as a model, to look for the parts that must be folded.
When you are finished with folding, try to repdroduce the steps to assemble the
box by looking at the second, still complete box and to reconstruct which flap goes underneath and which above the other. When you rebuilt your new box, you can glue the parts together. Again, look how it was done on your model box.
All you have to do then, is to embellish this little memory card box and then you’re done. With your memory cards you have now a pretty little gift for Christmas or a new colorful game for a rainy family afternoon.